Designers Fountain CASSINI Instrucciones De Instalación página 13

OPERATION – REMOTE CONTROL
Icon Function
Power ON/OFF: Press and release the power
button to turn the fan and light on or off
Press and release the button to turn the fan off
Press and release the button to turn the fan on
low speed
Press and release the button to turn the fan
high speed
Press and release the button, the fan
automatically switches between medium speed
≈
and low speed. Press the other wind buttons to
exit the function
Press and release the button, the fan will enter
the timer function, press other buttons to exit
1H 3H 6H
the function

Change the direction the fan spins.
Light ON/OFF
Press and release the button to turn the light on or off
***Power off the device, and then turn it on again. Within 10 sec,
press and hold the light button for 5 sec, the light will flash for 18
sec and enter the APP pairing mode for 180 sec. During this time,
the remote control has no way to control the fan and light; over 180
sec or successful pairing, the remote control will work properly.
–
Turn down the brightness
+
Turn up the brightness
Press and release the button to turn the light in night light mode
WW Click or long press to turn down the CCT, the minimum is 2200K
CW Click or long press to turn up the CCT, the maximum is 6500K
  Use the left/right buttons to scroll through the scenes, such as
Christmas, Halloween, Independence Day, etc.
Click the COLOR button, the light can enter the red, orange, yellow,
COLOR
green, blue, purple, Warm light , Daylight , Cool light
13