Serenco POWERHAND SIN-100.2138 Instrucciones De Uso página 2

UK NL DE FR
Technical Data lamp:
Type LED: 5W COB LED
Type LED spot: 1W SMD LED
Brightness: 500 Lumen
Brightness spot: 100 Lumen
Battery: 3.7 V 4.5 Ah
IP rating: IP65
IK rating: IK08
Charging time: 5.5 hours
Run time: 8 hours
Run time spot: 16 hours
Working temperature: -20 ~ 50°C
Product dimensions: 58.5x39x250 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Rechargeable work lamp with SMD LED technology
• COB LEDs provide 50~500 Lumen
• SMD LED spot provide 100 Lumen
• Long life LEDs (life span 100.000 hours)
• 1x 360° Integrated swivel hook
• 3 Integrated magnets (2x 20 N, 1x 21 N)
• 180° forward/backward swivel
• Low power consumption, low heat emission
• Battery indicator
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 4.5 Ah Li-Ion battery provides 8 and 16 hours constant light output
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp: connect the cable via the micro USB to the lamp directly. Then connect the USB plug to either the
100 ~ 240 V adapter provided or any other USB power source available (Max. charging amp. 2 A) and then plug into a
wall socket. Please re-charge in good time
• The lamp turns off when the battery is empty
• While charging, the charge level indicator on the lamp displays 1 flashing red LED and 3 green LEDs will start flashing
one by one till the battery is full and all LEDs stop flashing
• The charge level indicator on the lamp will show 1 red LED and 3 green LEDs when charging is complete
• The work light is controlled by 1 button. Push the ON/OFF button (1x) to turn the spot on (100 Lumen), 2x for the work
lamp (50~500 Lumen). Press and hold the ON / OFF button to adjust the light intensity between 50 and 500 lumens.
The lamp will flash when the lamp reaches the highest or weakest brightness. Push the ON / OFF button 3x to turn the unit OFF
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime. Always use the original charger
Accessories and spare parts:
USB-C cable (1m)
100 ~ 240 V charger
USB-car charger (optional)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775515623
Colour temperature: 5700 K
Weight: 355 g
Hydrocarbon and UV resistant
Technical data charger:
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A
• IP65 rated
• IK08 rated
• Robust, shock resistant ABS housing
• 103° light spread
180°