Serenco POWERHAND SIN-100.2035P2 Instrucciones De Uso página 2

UK NL DE FR
Technical Data:
Type LED: 6W COB LED
Type LED spot: 1W SMD LED
Brightness: 600 ~ 60 Lumen
Brightness spot: 100 Lumen
Battery: 3.7 V 2.6 Ah Li-Ion
IP rating: IP42
IK rating: IK09
Charging time (cable): 3.5 hours
Charging time (induction): 4.5 hours
Run time: 2.5 ~ 12 hours
Run time spot: 10 hours
Working temperature: -20 ~ 50°C
Product dimensions: 310.5x37.4x28.4 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Long life LEDs (life span 100.000 hours)
• 360° Integrated swivel hook
• 180 forward/backward swivel
• Cordless design improves safety, convenience and flexibility
• Lamp use is not affected by cold temperatures
• Made with high-quality materials for optimal use and durability
• 3.7 V 2.6 Ah Li-Ion battery provides 2.5 ~ 12 hours constant light output
• Robust, shock resistant ABS housing
• Broad 90° light spread
• 3 Integrated magnets (1x 38 N, 2x 8 N)
Instructions for use:
• Charge the battery for at least 8 hours before first use
• Charg the lamp via:
�
Charging pad: Attach the induction charging pad to the wall magnetically or with 4 screws. Connect the USB-C cable to the
induction charging pad, then connect the USB-C plug to the 100 ~ 240 V adapter (or other USB power source available, max. Charging
amp. 2 A) and plug in a wall socket. Hang the lamp by magnetic self-positioning on the induction charging pad.
�
USB-C cable: Connect the cable via the micro USB to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V adapter
or any other USB power source available (Max. charging amp. 2 A) and put the 100 ~ 240 V adapter in a wall socket.
• The Indicator LED's on the lamp will light up to indicate when charging (battery status)
• Take the lamp off the charging cradle, press the test button to show battery capacity
• If the indicator on the lamp shows 3 green + 1 red LED = battery capacity approx. 76-100%
• If the indicator on the lamp shows 2 green + 1 red LED = battery capacity approx. 51-75%
• If the indicator on the lamp shows 1 green + 1 red LED = battery capacity approx. 26-50%
• If the indicator on the Lamp only shows a redLED the battery level is ≤ 25%, please re-charge lamp
• The work light is controlled by 1 Button. Push the ON/OFF button 1x to turn the spot on, push the ON/OFF button 2x to turn the
main light on. Press and hold the ON / OFF button to adjust the light intensity between 60 and 600 lumens. Push the ON/OFF
button 3x to turn the unit OFF
• Memory funtion: the lamp will turn on in the last used position
• Do not leave the battery in a fully discharged condition. Recharge the worklamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime.
Accessories and spare parts:
USB-C cable
Magnetic induction charging pad (SIN-100.2035-6)
100 ~ 240 V, 2 A charger (SIN-100.1002)
USB-car charger optional (SIN-100.0035-1)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775512516
Colour temperature: 5500 ~ 6500 K
Weight: 195 g
Hydrocarbon and UV resistant
Technical data charger (SIN-100.1002):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 2 A
180°
USB-C
Output
Max. 1 A
Input
5 V 2 A