Descargar Imprimir esta página

Omcan CE-CN-0002-B Manual De Instrucciones página 7

Publicidad

OPERATION STEPS
1. Lift up the water tray lid, add the water to the water box.
2. Turn the thermostat to the "0" placement.
3. Plug into the power supply, then the indication light will turn green, set the dial to the required temperature
setting, the yellow light will turn on and the heating tube will start to work. When the temperature reaches
the desired setting, the thermostat will shut off the power, the yellow light will turn off, and the heating
tube will stop working. When the temperature drops below the desired temperature, the thermostat will
start working again automatically, and the process will begin again. This process repeats until the unit is
switched off.
4. When finished, turn the thermostat to the "0" placement and disconnect from the power supply.
CLEANING AND MAINTENANCE
Clean the machine with a damp cloth and mild detergent. Never rinse the machine with running water or spray
jets.
NOTES
User should remove the plug from the power supply and switch the machine off when not in use and when
maintaining. If the machine is not working nominally, please contact Omcan for service.
DELIMING
The pasta cooker MUST be delimed periodically (depending upon usage, every 3-4 weeks). Follow the
deliming agent manufacturer's instructions. Rinse thoroughly at least 3 times before using the pasta cooker
after deliming.
The pasta cooker should be cleaned after each day's operation; however, it may require cleaning more often,
depending on the volume of production. A clean boiler performs better and more safely, produces higher quality
product and reduces maintenance costs. When cleaning, always consider safety first. Ensure all power is off
and the unit has been disconnected from the power source.
Warning: Allow the pasta cooker and the water to completely cool before cleaning.
FAILING TO DESCALE HEATING ELEMENTS WILL VOID WARRANTY.
DRAINING - ONLY APPLIES TO MODEL CE-CN-0004-A
To drain model CE-CN-0004-A, simply place a bucket or receptacle below the drain spouts and open the
valves to drain the waste water.
Maintenance
7
Operation

Publicidad

loading

Este manual también es adecuado para:

Ce-cn-0004-bCe-cn-0004-a435574355843559