Descargar Imprimir esta página

BGS technic 4102 Manual De Instrucciones página 3

Carro de herramientas, 7 cajones, vacío

Publicidad

Idiomas disponibles

Idiomas disponibles

Workshop Trolley, 7 drawers, empty
SPECIFICATIONS
Drawers-
rated load capacity:
Drawer height:
Drawer width:
Drawer depth:
Drawer wall thickness:
Plastic work plate
Corpus wall thickness:
Total width:
Total height:
Total depth:
Empty weight:
AVAILABLE SPARE PARTS
Plastic hood
Sliding rails
Swivel castor
Fixed castor
Replacement lock
SAFETY INFORMATION
Never open more than one drawer at the same time, otherwise the workshop trolley may tip
over.
Close and lock all drawers before moving the workshop trolley.
Do not stand or sit on the workshop trolley or its drawers as there is a risk of tipping, falling or
injury.
Do not place the workshop trolley on a vehicle loading platform or other movable objects.
Actuate the castor brakes when the workshop trolley is stationary.
Pull the workshop trolley exclusively by the side handle provided for this purpose.
Never load the workshop trolley and its drawers with a higher load than specified in the
"Specifications" (Rated load capacity) section.
MOUNTING THE CASTORS
The workshop trolley is supplied with heavy-duty castors, including two swivel castors with brake and
two immobile fixed castors.
Mount the pair of swivel castors on the narrow underside of the workshop trolley and the pair of fixed
castors on the opposite underside of the workshop trolley using the 4 screws and washers supplied.
MOUNTING THE SIDE HANDLE
Mount the side handle on the side equipped with the swivel castors. Use the screws supplied.
MAINTENANCE / SERVICING
Grease the upper and lower channels of the drawer runners at least twice a year.
Clean the workshop trolley with a soft cloth and for example washing-up liquid when required;
aggressive cleaning agents can damage the surfaces.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
max. 20 kg for drawers with
a height of 54 mm
max. 25 kg for drawers with
a height of 112 mm
4x 54 mm | 3x 112 mm
569 mm
409 mm
0.8 mm
with 5 storage
compartments,
max. load bearing capacity
50 kg
1.2 mm
724 mm
859 mm
470 mm
62 kg
Item 67164
Item 4111-1
Item 4111-2
Item 4111-3
Item 4111-9
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 4102
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading