Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFEGUARDS
• Remove the kettle from the kettle base before filling. Remove all moisture
on the bottom of the kettle before placing it onto the kettle base.
• Kettle must be operated on a flat surface away from the edge of the
counter to prevent accidental tipping.
• Never move the kettle and kettle base together while the unit is in use.
• To avoid burns and risk of personal injury, use extreme caution when
carrying the kettle containing hot water.
• Do not use the kettle if your hands are wet.
• Position the kettle properly on the kettle base before switching on.
• After using the kettle, wait until the kettle has cooled down before
removing the lid. To avoid possible steam damage, turn spout away
from walls or cabinets during use.
• If setting down the kettle body on a table surface, use a protective
pad under the kettle after it has been heated to prevent damage to
surfaces.
• To reduce the risk of fire or electric shock, do not remove bottom
cover from base or disassemble base or kettle in any way. There are
no user-serviceable parts inside. Repair should be done by authorized
service personnel only. Opening base or kettle will result in a void of
the warranty.
• Do not operate in the presence of explosive and/or flammable fumes.
• Do not use the kettle for other than intended use. This appliance is
intended for household and commercial use only. Use for anything
other than intended use will void the warranty.
8
GROUNDED PLUG
CONTINUED
This appliance has a grounded, three-prong plug and must be grounded
with a three- prong outlet when in use. To ensure protection against risk
of electric shock or fire, connect to properly grounded outlets only. Do
not attempt to bypass this safety feature.
DO NOT HEAT AN EMPTY KETTLE
The concealed heating element in the bottom of the kettle body is
protected by an automatic safety device. If your kettle is accidentally
heated without being filled or is allowed to boil dry, it will automatically
cool down and then turn off. If this happens, unplug the kettle, fill with
cold water, and wait a few minutes before replacing it on the base and
plugging in.
SAVE THESE INSTRUCTIONS
9
Publicidad
