Descargar Imprimir esta página

BGS technic 9190 Manual De Instrucciones página 9

Arrancador multifunción

Publicidad

Idiomas disponibles

Idiomas disponibles

CHARGING OF 5V USB DEVISES
1. Choosing suitable and intelligent charge connector.
Then inserting the USB connector into 5V USB output port.
2. Connecting the charge connetor with intelligent equipment,
such as tablets, smartphone, bluetooth and so on.
3. Automatic idetification charge smartphone automatically,
tablets and other's electronic product.
CHARGING OF 12V/16V/19V LAPTOP
1. Selecting suitable charge connector of computer and connect it.
2. Pressing the switch lightly and start the power source.
3. Pressing the switch again to change different Volt.
The relevant LED flashing will be blink.
The voltage will be auto locked automatically after three seconds.
Different computer have different voltage in the market.
Please make sure the computer's volt that you used.
4. Connecting the computer's connector with power source in 15
seconds, the computer can be charged.
5. lf you need to reselect the Volt, please turn off the computer and
power source.
After 15 seconds, when the power source auto-off, starting it from
the first step again. Take charging for 19V laptop as an example.
TROUBLE SHOOTING
If the following operations are unable to troubleshoot, please stop using the jump starter and contact
with the stores which you bought the jump starter from.
Trouble
The power capacity of the device
is shown in 100%, but did not fully
charged in charging process.
Nothing happens when pressing
the switch button.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Cause
When the screen shows 100%
charged and this situation
means it is semi-state of
charge, which is conducive to
long-term storage when the
device is not in use for long
time.
Low voltage protection of the
device is started and the device
cannot be turned on.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Switch the volt
Solution
Pull out the charge plug,
then reinsert.
Insert the charger plug into
the input port to activate.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading