Magmaweld ECO Serie Manual Del Usuario página 11

ECO SERIES
TECHNICAL INFORMATION
1.1 General Information
ECO SERIES is an easy-to-use three to phase industrial inverter MIG/MAG welding machine designed for
heavy conditions. It provides fast and easy use with its user-friendly interface. It offers excellent welding
characteristics with all solid and flux-cored wires. Welding voltage, wire feed speed can be adjusted from the
panel in front of the wire feeder.
Welding voltage and current can be monitored through a digital display. Optimal welding parameters can be
selected from the table located inside the wire feeding unit. There is an integrated gas cylinder platform and
a 24 V electrical socket for the CO2 gas heater. It is cooled by a fan and has protection against overheating.
1.2 Machine Components
www.magmaweld.com
1
2
3
4
5
6
1- Left Display
Figure 1 : ID 350 - 500 MW ECO Front and Rear View
2- Adjustment Pot
3- Torch Connection
4- On / Off Switch
5- Grounding Connection
6- Data Socket
7- Right Display
8- Adjustment Pot
9- Torch Cold Water Outlet
10- Torch Hot Water Inlet
7
8
9
10
17
11
12
18
13
14
15
16
11- Gas Output
12- Intermediate Package Torch Connection
13- Water Unit Led
14- Water Unit Cold Water Outlet
15- Water Unit Hot Water Inlet
16- Water Unit
17- Heater Socket
18- Cooling System Connection
19- Gas Inlet
20- Mains Cable
Technical Information
19
20
USER MANUAL
11
EN