Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Step 3: Measuring and checking the analysis report
Step on the scale again and wait for the
If the number flashes twice, that means the
number on the display to become stable.
weight measurement is complete. When
the number 0 stops moving across the
screen from left to right, that means the
body analysis is complete.
MEASUREMENT TIPS
Read the warning on the first page of the manual carefully and follow the instructions. This product employs BIA
(bioelectrical impedance analysis) technology. For the most accurate and consistent measurement results, use it
during the day and try to maintain the same measuring conditions.
Please avoid measuring:
• During or immediately after intense exercise
• Immediately after a shower, bath or sauna
• In combination with heavy alcohol consumption
• During or immediately after meals
• While having a fever
When measuring, make sure you stand straight and barefoot on the scale. Wearing socks will lead to inaccurate
readings. Dirty feet may also negatively affect measurement accuracy. Measurement units can be changed from
imperial/US (pounds for weight, feet/inch for height) to metric (kilograms for weight, meters for height) and vice
versa in the smartphone app.
10
Check the body analysis report in the app.
Measuring weight correctly: place the scale on a flat, hard surface and reset it before measuring. Before you step on the scale, the weight
display should show the value 0.0.
Measuring body fat and other body composition parameters correctly: stand straight on the scale, with both feet placed over the
electrodes as shown in the above figure.
TROUBLESHOOTING
Some issues that arise may be solved by the user. If the problem persists after having tried the following solutions,
please contact Prozis customer service.
Working normally
Change battery
No Display
No
connection
EN
11
Publicidad
