Zizito EGON Manual Del Usuario página 11

5. FITTING THE TRAY
Position the tray to the front of the arms, full the front lever (a) found on the underside
of the tray, whilst sliding the tray along with the slot (b) to the position required. The tray
has three positions only as indicated on the arm rests, line the tray with the desired
position, release the levers to lock position. In the case the tray is not automatically
locked onto the armrests, move the tray slightly until a double click is heard signaling the
tray is securely locked.
4. FITTING THE SEAT
COVER
Slide the pocket of the
seat cover back over the
curved back frame. Secure
the seat sides by wrapping
them around the frame and
fastening press studs (a) at
each side of the seat
WARNING!!
Never leave the tray fitted in a
position in which the warning
signs are visible.
The top tray can be removed
by pulling at the ridge (c) and
(d). To replace again, position
the top tray over the bottom
tray and push down to secure.
The tray maybe stored on the
back legs of the highchair. Align
the holes in the rear of the tray
with the small pegs on the back
legs.
11