Publicidad
Idiomas disponibles
Idiomas disponibles
The cables are tied with Velcro; as picture 1
SKU1～SKU5 ,
,The cables are tied with white tape; as picture 2
SKU6～SKU7
WARNING! Assembly by an adult, not suitable for children under 36
months. The long cord has a strangulation hazard.
INSTALLATION INSTRUCTIONS
1. Please dispose of all plastic bags carefully and keep them away from children
and pet.
2. Check all components provided according to the list in this manual. Make sure
you have all of the parts listed.
Although paying particular attention when manufacturing this product,
3.
you must be careful during the assembly process to avoid being scratched
by sharp edges.
4. Wear protective gloves, during assembly and using.
ASSEMBLY STEPS
1.How high should l install my zip line?
As a general rule ,we recommend installing the finish point of the course 6ft
to 8ft off the ground, and 2ft taller than the tallest rider. When picking the
start point of the course, it needs to be higher than the finish point to create
a safe angle to ride down. We recommend giving the course an
8-10%slope.to calculate this,take the length of your course and multiply it
by 0.08 or 0.1. Then take that number, and add it to the height of your
course is finish point. This number is your recommended starting height.
BE CAREFUI !
Do not use buildings or playground structures (unless
specifically built for zip lines), live power/telephone poles, dead trees or
stumps,trees with rot,dis-ease, structural cracks, excessive lean, exposed
roots,or trees in boggy, wet, sandy, loose soil. This is only a partial list. You
must use your good judgment in determining what is not an appropriate
anchor point. If in doubt, contact us.
- 5 -
Publicidad
