DeLOCK 42027 Manual Del Usuario página 4

English
System requirements
• Android 11.0 or above
• Chrome OS
• Linux Kernel 5.15 or above
• Mac OS 13.1 or above
• Windows 10/10-64/11
• iPad Air (4th Generation) or above
• iPad Pro (3rd Generation) or above
• Surface Pro 7
• Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or
Thunderbolt™ 4 port
Package content
• External enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 60 cm
• External power supply
• 2 x thermal conductive pad
• 2 x thermal conductive plate
• 4 x rubber nipple
• User manual
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when using the HDD
• Pay attention that the HDD can be hot when it is connected to the device.
Hardware Installation
1. Open the housing by pushing the inner part slightly in. Make sure the
inner part is not locked.
2. Now you plug your M.2 SSD into the slot.
3.
Fix the module with the help of the rubber nipple.
4. Close the enclosure.
5.
Now you can connect the enclosure via the USB interface to your
system.
6.
Switch on your computer.
7. The external drive will be recognized and you can start using the device
immediately.
-3-