Publicidad
Idiomas disponibles
Idiomas disponibles
English
Clone Function
Note:
Make sure that the SSD to which you want to transfer the data has the same
or higher capacity than the SSD from which you want to copy.
All data which are on the target SSD will be overwritten during the copy
procedure! Therefore we recommend to save the old data before or to use
an empty SSD.
Clone Function without PC
1.
Insert the SSD from which you want to copy the data into slot "A"
(Source).
2.
Insert the SSD on which you want to save the data into slot "B".
3.
Connect the power supply to the DC female port.
4.
The LED on the appropriate slots lights up.
5.
Press the clone button for about 3 - 5 sec. in order to activate the clone
process.
6.
Press the clone button again briefly.
7.
The LED indicator shows the copy status.
8.
The copy process is completed as soon as all LEDs light up blue.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any
purpose, regardless in which way or by any means, electronically or
mechanically, without explicit written approval of Delock.
Edition: 11/2023
-4-
Publicidad
