Descargar Imprimir esta página

Amica VM 9011 Joran Turbo Pet Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Instructions:
Do not wash the brush. If hair is caught in the brush, remove
it with scissors or a knife.
Clean the dust filter at least once a month, depending on frequen-
cy of use.
Turn the dust bin and remove it.
Twist the strainer and remove it.
Remove the foam filter and bracket.
Separate the foam filter from the fleece filter by sliding them
apart.
Rinse and dry thoroughly. Assemble when dry.
Clean a filter behind the motor every about 6 months, depending
on the frequency of use.
Turn the filter cover and remove it.
Remove the filter located behind the motor
Shake off the dust.
Every about 6 months, replace the filter or rinse and dry it
thoroughly.
Put the filter and cover back in and turn to the "locked" po-
sition.
Description of the problem
1. The vacuum cleaner does
not clean well..
2. The vacuum cleaner has
turned off or is not working.
3. The floor brush motor
overheats and turns off.
Procedure:
1. Empty the dust container.
2. Remove excess dust from
the filters.
3. Wash the filters.
4. Ensure there is no blockage.
1. Charge the vacuum cleaner
(check that the mains socket
is working and that the switch
is on).
2. The appliance may be
clogged ­ check points 1 to 4
above.
3. Product thermal protection
activated. Turn off the vacuum
cleaner and let the motor cool
down for a minimum of an
hour before using it again.
1. The floor brush is blocked
— refer to the "Electric brush
cleaning and maintenance"
section of this manual.
2. Roller brush motor overhe-
ated due to heavy load. This
may be due to prolonged use
on a long­pile carpet or soft
rug. Allow the vacuum cleaner
to cool down for a minimum
of an hour before using it
again.
9
EN

Publicidad

loading

Este manual también es adecuado para:

Vm 9012 joran turbo