Descargar Imprimir esta página

Westinghouse WBL-703 Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

17. Always operate blender with lid in place.
18. Do not blend hot liquids.
19. Ensure cutting blade assembly is tight and secure to jar. Injury can result if moving
blades accidentally become exposed.
20. Check that the appliance is OFF ( ) before plugging cord into wall outlet. To disconnect,
turn the control to OFF ( ); then remove plug from wall outlet. To unplug, grasp the
plug and pull from the outlet. Never pull from the power cord.
21. Do not use appliance for other than intended purpose.
22. Do not place blender jar in the freezer filled with food or liquidagent, or similarly
qualified persons.
SAVE THESE INSTRUCTIONS
This appliance is intended for household use only. Use for food or liquids only.
WARNING • Electrical Shock Hazard:
This appliance is provided with a polarized plug (one wide blade) to reduce the risk of
electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety
purpose of the plug by modifying the plug in any way or by using an adapter. If the plug
does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician
replace the outlet.
The length of the cord used on this appliance was selected to reduce the hazards of
becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an
approved extension cord may be used. The electrical rating of the extension cord must
be equal to or greater than the rating of the appliance. Care must be taken to arrange
the extension cord so that it will not drape over the countertop or tabletop where it can
be pulled on by children or accidentally tripped over.
If the cutting unit blades lock and do not move, it will damage the motor. Do not use.
Call the toll-free customer service number for information.
Do not place blender jar in the freezer filled with food or liquid. This will freeze and
damage the cutting unit, jar, and motor.
6

Publicidad

loading