Descargar Imprimir esta página

Gadnic Care S1200 PRO Manual De Usuario página 11

Ocultar thumbs Ver también para Care S1200 PRO:

Publicidad

Idiomas disponibles

Idiomas disponibles

To switch on the brush dryer, turn the temperature control knob anticlockwise to
the desired setting.
This brush uses hot air steam to dry the hair.
Unlike other hair dryers, it uses less power.
The top of the brush is likely to get hot.
This is due to the operation of the unit.
Take the necessary precautions when handling the brush, especially if you bring it too
close to your head.
The brush has four (4) positions: off, low, medium and high.
Recomendaciones de peinado utiles para el Cepillo secador y voluminizador
1.
Dry your hair with a towel to remove excess water.
2.
Plug the unit into the wall socket and set the selector switch to the desired position.
Use the LOW setting to dry fine hair and the HIGH setting for thick hair.
Use the lowest temperature setting to fix the hairstyle.
3.
For best results, separate hair into strands and dry them one at a time.
4.
Place the all-in-one blow-drying brush near the roots and glide it towards the
ends.
The soft bristles will help to detangle and straighten hair even in hard to reach areas at
the back of the head.
5. Repeat with the rest of the strands until all hair is dry for a smooth, silky and luxurious
style.
INSTRUCTIONS FOR USE
IMPORTANT NOTE
11

Publicidad

loading

Este manual también es adecuado para:

Seca0003