Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Before using the unit
Mains power
•
Plug the power cable into the mains socket.
•
The unit will enter standby mode and flash 0:00 until the clock is set.
Backup power
The unit is equipped with a backup power system that uses a 3 V CR2032 lithium battery
(supplied).
In the event of a power cut, the unit automatically switches to battery power and retains the
current time, alarm settings and saved radio stations.
•
Unplug the power cable from the mains socket before inserting the battery.
•
To open the battery compartment, use a screwdriver to undo and remove the screw on
the battery compartment cover. Lift off the cover.
•
Insert the battery in the compartment the correct way around, by observing the polarity
(+ and -) indicated on the unit.
•
Reposition the battery compartment cover and tighten the screw to secure it in place.
NOTE: For a better performance and longer operating time, we recommend using
a good quality battery.
FM radio antenna
•
Unwind and extend the antenna for a better FM reception.
Operation
Power on/off
•
In standby mode, press the
Setting the clock
•
Press and hold the SET ( ) button to enter the clock setting mode. The time will start
to flash.
•
Press the
button to select the hour(s).
•
Press the
button to select the minute(s).
•
Press and hold
•
Press the SET ( ) button to confirm the time setting.
Setting the alarm
The unit has two alarms, and each alarm can be set to make a buzzing sound or play the radio.
•
Make sure the radio is turned off.
•
Press and hold
time will flash.
button to turn the unit on or off.
or
to quickly scroll through the numbers.
or
to enter the alarm 1 or alarm 2 setting mode. The alarm
14
EN
Publicidad
