Newlux Trevi Manual página 41

The assembly of the chair is easy. It is important to do it properly to work. The
chair includes several pieces with the remote control (1, 2, 3 and 4). Follow
the instructions to proceed to the assembly of the chair:
1. Place the back in the manner shown in the picture. 1
2. Connect the back wires to the seat ones. It is important to connect the
pins correctly:
• Two white pins 8-pointed together.
• The black pin 8-pointed with remote control.
• The transformer with the male connection backing.
3. Connect the control and the transformer with the wires located behind
the seat. The remote control cables must pass below the paws, so avoid
them to break.
1
2
1
NOTE: when you place the back, put the control on the right-hand side of the
2
seat. Pull the lateral lever of the chair to extend the footrest part and to incline
backwards, just push it with your body.
CHAIR ASSEMBLY
CH-143060L
1
1
CH-143060L
1
3
2
2
3
1
3
2
3
1
2
4
4
4
CH-143060L
2
1
4
3
2
3
4
41 |