AstroAI CZK-3631 Manual Del Usuario página 10

7. After the inflation is complete, disconnect the power cord from the
12 V outlet. Remove the quick connector from the valve stem. Place
EN
the tire valve cap back on the valve stem. Meanwhile, press the inflation
switch to the "O" to turn o the pump and store it until next use.
TROUBLESHOOTING/FAQ
Slow Inflation
The quick connector is not properly connected to the tire's valve stem.
Excessive use of the pump will slow the inflation speed. Let it cool for
at least 10 minutes.
The Air Pump Is Operating Abnormally
The quick connector is not properly connected to the tire's valve stem.
The 12 V outlet is not connected securely.
The preset tire pressure is lower than the current tire pressure; increase
the preset tire pressure to the manufacturer's recommended level.
- 10 -