Blackstone 1666AZ Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Place the griddle top onto the griddle body by aligning the
STEP 02
four pins to the holes of the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❷ ❷
❶ ❶
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Hang the grease cup in the slot on the back of the
STEP 04
griddle body�
Heavy pieces. Two people should assemble this appliance.
06
CAUTIoN
Install the two (2) control knobs by pushing them into place
STEP 03
in the oFF position�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Proceed to USING YOUR BLACKSTONE�
STEP 05
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
Model: 1666AZ
BLACKSTONEPRODUCTS.COM/SUPPORT