Blackstone 6008 Manual Del Propietário página 11

Make sure the front pins are fully
Model: 6008
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
With the help of another person, place the griddle top
STEP 21
and hood on the main body by aligning the 4 pins to the holes of
the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Hang the grease cup with grease cup liner in the slot at the
STEP 23
back of the griddle body�
Heavy pieces. Two people should assemble this appliance.
re
• DO NOT mix old and new batteries. • Maximum weight on the side shelf is 10 lbs (4.5 kg).
rain.
• The side shelf may get hot while appliance is in use.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
BLACKSTONEPRODUCTS.COM/SUPPORT
❷ ❷
❶ ❶
CAUTIoN
NOTICE
NOTICE
ASSEMBLY GUIDE
Install the four (4) control knobs by pushing them into place
STEP 22
in the oFF position�
Proceed to USING YOUR BLACKSTONE�
STEP 24
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
Hot appliance. The cover/lid/hood (as applicable) MUST be
open/removed when the appliance is in use.
| OWNER'S MANUAL
CAUTIoN
11