Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the Remote Controller
2) Press
each time to change the operating mode according to the
order shown in Figure 3.5;
Cool
3) In Cool, Dry or Heat mode, press ▲ and ▼ to adjust the
temperature setting. Press ▲ and ▼ to adjust the temperature by 1°C
(default). Long press to change the temperature continuously.
Note:
• Temperature setting cannot be adjusted in the Fan mode.
5.3 Fan Speed Operations
Every time when you press the
the following order.(see Figure 3.6).
1) 7 fan speeds: The default in the remote controller is the mode with 7
fan speeds, where the Fan Speed will be adjusted in turn as shown in
Figure 3.7;
Auto Speed 1 Speed 2 Speed 3 Speed 4
2) 3 fan speeds: Fan Speed will be adjusted in turn as shown in Figure
3.8.
Note: • The fan speed set on the remote controller should match with
the air conditioner. For how to set the fan speed, see section
"Initial Settings" in this document.
• Fan speeds cannot be adjusted in Dry mode.
13
Dry
Figure 3.5
Figure 3.6
Figure 3.7
Auto
Low
Figure 3.8
Fan
Heat
button, fan speed is changed in
Speed 5
Mid
High
V.1
Speed 6
Speed 7
Publicidad
