KitchenBrothers KB4031 Manual De Instrucciones página 37

Problem
The product is not
working.
The product is cooling
too much.
The food is not cold
enough.
Cause
Temperature setting knob
is set to 0.
The plug is not plugged
in or is loose.
The fuse is blown or
defective.
The socket is defective.
The temperature is set
too cold.
The temperature is not
set correctly.
The door was open for an
extended period of time.
A large amount of hot
food was placed in the
product within the last 24
hours.
The product is near a
heat source.
English
Solution
Turn the knob to turn the
product on.
Plug in the power cord.
Check the fuse and have it
replaced if necessary.
This should be fixed by an
electrician.
Temporarily turn the
temperature setting knob
to a warmer setting (lower
number).
Set the temperature
setting knob to a colder
setting (higher number).
Do not open the door
longer than necessary.
Turn the temperature
setting knob temporarily
to a colder setting (higher
number).
Keep the product away
from heat, areas where
the temperature is
relatively high and heat
sources such as ovens.
37