Maxvac MEDI 10 Instruccion Manual página 6

opERATIoN
The operation panel is at the side of the
MEDI 10 and can only be operated with a
remote control.
1
2
The light panel gives you signals if you need
to change the fi lters
1. Flashing green light: UV-C start up
Green light: UV-C is okay
Yellow light: Replace UV-C lamp
2. Green light: G4/Carbon fi lter okay
Yellow light: Replace G4/
Carbon fi lter
3. Green light: H13 fi lter okay
Yellow light: Replace H13 fi lter
4. Red light: UV-C lamp must be changed,
machine will stop working.
5. Red light: G4 fi lter must be changed
6. Red light: H13 fi lter must be changed
7. Infra-red receiver
Connect the plug below to the socket at the
underside of the MEDI 10.
6 MEDI 10
4
5
6
3
7
uSAGE
The on / off button is located at the back of
the MEDI 10.
The speed can be changed
only with the remote. To
change the settings from the
ventilator press the button for
different speeds.
1. Speed: 30%
2. Speed: 70%
3. Speed: 100%
4. Off switch
1
2
3
4
MAX-VAc.coM