EUROCOM Panther 5SE Guia Del Usuario página 12

Part II: Intel Matrix
1. Press Ctrl + i to enter RAID configuration menu.
2. Select 1.Create RAID Volume and press Enter.
3. Type the RAID volume name and then press Tab or Enter to
advance to the next field.
4. Specify (use the up and down arrow keys) the RAID level
(RAID 0 or RAID 1 or RAID 5 - see
then press Tab or Enter to advance to the next field.
5. Press Enter and the system will select the physical disks to use.
6. Press Enter and select (if applicable) the Strip Size (best set to
default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection by
pressing Y.
10. This will now return to the main menu.
11. Select 4.Exit and press Enter, then press Y to exit the RAID
configuration menu.
12. Make sure the Windows 7 OS DVD is in the DVD drive and as
the computer starts up it will automatically boot from the
6
Table 2 on page 5) and
Figure 2
RAID
Created
Windows 7 OS DVD (you will be prompted to press a key to
boot from the DVD).
13. Press Enter to continue installing the operating system as
normal (see your Windows documentation if you need help on
installing the Windows OS).
A driver is included on the Device Drivers & Utilities +
User's Manual disc that will need to be installed as part of
the Windows installation procedure. However you will
need to go to an operable computer and copy the driver to
a USB Flash drive or external USB hard disk.
1. Go to the operable computer and copy the 00IRST folder from
the location below (D: denotes your DVD drive) on the Device
Drivers & Utilities + User's Manual disc to the USB Flash drive
or external USB hard disk.
• Windows 7 32bit
D:\Option\00IRST\f6flpy\RSTe_f6_iaStorA_32\
• Windows 7 64bit
D:\Option\00IRST\f6flpy\RSTe_f6_iaStorA_64\
2. Install Windows from your Microsoft Windows 7 disc and click
to select Load Driver when the "Where do you want to install
Windows?" screen appears.
3. Click Browse and browse to the location you copied the files to
on your USB Flash drive or external USB hard disk (X: denotes
your USB Flash drive or external USB hard disk):
• Windows 7 32bit
X:\00IRST\f6flpy\RSTe_f6_iaStorA_32\
• Windows 7 64bit
X:\00IRST\f6flpy\RSTe_f6_iaStorA_64\
4. Follow the on-screen instructions to install the Windows 7
operating system.