Orbegozo RMN 1575 Manual De Instrucciones página 13

RMN 1575
− There is tip over switch on the base. When the heater
tips over,
automatically.
MOUNTING LEGS
− Place the wheels on the brackets and click them together.
− Place the brackets with wheels on the ends of the bottom
of the unit and screw.
MANUAL
− Make sure the power control is in position "0".
− Connect the device to the network.
− Turn the thermostat control knob in the direction of clockwise into position maximum.
− Turn the power selector to the desired position .
o Position 1: Minimum power
o Position 2: Maximum power
o Position 0: Off
RMN 1575
− When the room temperature is desired, turn the thermostat control counter clockwise
to your needed position. Leave command in that position, and the thermostat will
automatically maintain the selected temperature, initiating a series of connections and
disconnections.
− When not using the unit, turn the power switch to "0" (OFF) and disconnect the network
device.
MAINTENANCE AND CLEANING
− Before cleaning, make sure the appliance is disconnected from the network.
− Cool hot parts.
− It is important to keep the grilles clean for keeping a suitable air evacuation. Use a
vacuum cleaner to clean it.
the electricity
Position 0
OFF
will be
Position 1 Position 2
500W
turned off
1500 W
13