Publicidad
ENGLISH
Service immediately.
EUROPE, S.L.
- This refrigeration appliance is not suitable for built-in installation.
- Remove all packaging, including the plastic protection on the bottom of the
appliance and the adhesive tape securing the shelves and door compartments inside.
- Place the refrigerator in a suitable position and adjust the feet to level it. It is
recommended to clean the appliance with a hot, soapy cloth and dry it thoroughly
before use.
- Place the refrigerator and adjust its height, clean it, let it rest for 4 to 6 hours, and
switch it on. This will help ensuring that the compressor oil has properly settled, and
that the appliance is running normally.
3. OPERATION
Installation size. Fig. 3
- Choose an appropriate level-surfaced location to place your appliance for easy use.
Avoid placing the appliance near heat sources, under direct sunlight, or in moist
environments.
A
B (mm)
(mm)
621
911
The above values are indicative for installation purposes. Actual sizes may vary slightly.
- To ensure that the appliance runs at maximum efficiency, allow enough space
around the appliance as shown in Figure 4.
Start-up
- Connect the power cord and turn on the switch.
- On first use, the display will show the respective default temperature values
(refrigerator compartment is set to 5°C, freezer compartment to -18°C).
- The default mode is the power-saving mode, with the display timeout time being 20
seconds. This mode saves energy and increases the lifespan of the LED lights.
Selecting modes and functions
- Each time you press the Function button, you will cycle through the different
operating modes.
- Holiday mode: the refrigerator compartment will run at 6°C while the freezer
32
EVVO FRIGORÍFICO 4 PUERTAS F100X AQUA/F100B GLASS AQUA
C
D
(mm)
(mm)
1774 1830 706
E (mm)
F (mm)
1661
H e i g h t
M
(mm)
(mm)
393
1088
Publicidad
