Mora MRB221N6BSE Guía De Uso Y Cuidado página 12

1/4" extension
tubing
4. You need to purchase several item to
complete this connection. You may find
these items sold as a kit at local
hardware store.
Connecting to the water supply
line
1.First,shut off the main water supply.
2.Using the power drill and a 1/4'' drill bit
drill into the cold-water line and
connect the saddle-type shutoff valve.
Cold water line
Pipe clamp
Shut off valve
3.Connect 1/4" extension tubing to
shutoff valve outlet.
1 Coupler
2 clips
Saddle-type
Packing
nut
Outllet valve
Ferrule (sleeve)
4. Flush the tubing. Turn the main water
supply on and flush out the tubing until
the water is clear. Then, shut the water
off at the water valve after about a
quart of water has flushed through the
tubing.
5. Connect the extension tubing line
with the line on the back of the fridge
with the coupler. Fully insert the
extension tubing into the coupler, and
then insert the clip onto the coupler to
lock up the tubing. Do the same with
the other end. After both of clips are
inserted, check the line to make sure it is
held firmly by the clips.
Compression
nut
1/4" Extension
tubing
12