Mora MRB221N6BSE Guía De Uso Y Cuidado página 13

Clip
Water
line
Coupler
Ensure that the water line does
not get pinched or bent when
installing. This can result in
improper water flow through the
line and will affect the
functionality of the fridge.
6. Turn the water on and check for
leakage.
Check to see if leaks occur at the
water line connections.
Water
line
Note
Caution
Connect Water Line to Refrigerator
IMPROTANT: If you turn the refrigerator
on before the water is connected, turn
off the ice maker.
1. You may need to purchase below
items to complete this connection. And
you may find these items sold as a kit at
a local hardware store.
a Ferrule (Sleeve) -1 pcs
a b c
b 1/4" Compression nut
- 1 pcs
c 1/4" Water line - 1 pcs
2. Unplug refrigerator or disconnect
power.
3. Close shut off value.
4. Thread a 1/4 " compression nut and
ferrule (sleeve) onto the free end and
of 1/4" water line.
5. Insert the free end and of the 1/4"
water line into the brass fitting attached
to the water inlet on the back of the
refrigerator.
6. Slide the 1/4" compression nut over
the ferrule (sleeve) and screw the 1/4"
compression nut onto the brass ftting.
c 1/4" Water line
b 1/4" Compression
nut
a Ferrule (Sleeve)
d Brass fitting
e Water inlet
13