Steren SEG-475 Guia página 2

Before using your new Steren´s product, please read this instruction manual to prevent
I M P O R T A N T
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
C A U T I O N S
Clean only with a soft, dry cloth.
•
Do not mix old batteries with new ones.
•
Check the batteries regularly.
•
C O N T R O L S
2
1. Green LED: Indicates when the safe box is opened.
2. Knob
3. Override key: To open the safe box without access code.
4. Numerical keys: Use to introduce access code.
5. Yellow LED: Turns on when a number is entered, when a code is changed, and
it blinks when a wrong code is entered. Also it flashes when the batteries are fully
discharged.
6. Red LED: The red light will turn on when the charge of the batteries is low.
The buttons C and E have same function to confirm code access.
S E T T I N G A S E C U R I T Y C O D E
To set a code, follow these steps:
- Open the box using the included key.
- Put new 4 batteries on battery´s compartment.
- Press the red button located inside the battery compartment.
- The yellow LED lights on. You have 20 seconds to enter a new security code. You
can enter from 3 to 8 numerical digits. To finalize the process, press C or E button,
and the yellow LED will turn off.
The factory setting code is 159.
any damage.
1 6 5
3
4
H O W T O O P E N T H E B O X
1. Enter the security code, then press C or E button.
2. If the code is correct, the green LED will ight on.
3. If the entered security code is wrong, the yellow LED will blink and the safe box
will emit a sound. If you enter a wrong code three times, the equipment will block the
system for 20 seconds, you cannot enter more codes during this time. If three
incorrect codes are entered once again, the box will block and an audible alarm will
sound.
To deactivate the alarm sequence, remove the batteries and reinsert them once
again. Remember that any codes that have been programmed will be lost once the
batteries are removed, leaving only the pre-determined default factory code (159).
Use the override key if you forgot the security code. In this way you can open the
door just placing the key in the hidden lock and turning it to the right while turning the
knob to the right side.
B A T T E R Y R E P L A C E M E N T
The red light will turn on when the charge of the batteries is low. You must replace
the batteries.
- Open the safe box door.
- Release the battery compartment cover.
- Place 4 AA type batteries. Pay attention to polarity.
- Replace the batteries compartment.
- Make a test before to close the door.
Remember that any codes programmed will be lost in case that batteries are
removed or these lose charge, leaving only the factory code (159).
TROUBLE
• Use the security key to open the box and check the battery
1. I can´t open the safe box door:
status. Place a new one if it isnt´charged.
• Just keep the key in the close mode, and turn the knob to the
right to close.
2. The safe box doesn´t close:
• Check that the knob is closed. Use the security key and turn
to the left while turning the knob to the right side.
S P E C I F I C A T I O N S
Input: 6 V (4xAA)
Dimensions: 22.7 cm x 17 cm x 17 cm
Product design and specifications are subject to change without notice.
Product: Mini electronic safe box
Part number: SEG-475
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
Immediately change the batteries when
the red LED is activated, otherwise you
may not control (opening and closing) the
box, if that happens use the emergency
keys to open the box.
SOLUTIONS
WARRANTY
CONDITIONS
01 800 500 9000