Publicidad
Idiomas disponibles
Idiomas disponibles
Press the
BASS disappears from the display.
.. Equaliser
Press the EQ
8
equaliser settings (FLAT, POP, CLASSIC, JAZZ or ROCK).
The selected equaliser setting is then shown on the display.
.. Party LED light
Press the
6
effect L to L.
The light front lights up to the beat of the music.
Press the
button several times until LOFF is shown on the display to deacti-
vate all party light effects.
.. Colour selection
Press the
7
tion.
With the exception of two buttons, all buttons on the DJ booth now light up in col-
our.
Now press the desired colour to change the colour of the light front accordingly.
Press one of the unlit buttons to deactivate the strobe effect for the upper half of
the speaker or the entire speaker front.
.. Sound eff ects
Press the
effect selection.
Then press any button on the DJ booth to play a sound effect.
. Connecting a microphone
You can connect a microphone to the party speaker.
Microphones can be used in all operating modes.
To connect a microphone, proceed as follows:
Switch off the sound system.
Connect the microphone to the microphone input MIC
Switch on the party speaker.
Use the + or controller to set the microphone volume you require.
152
button to switch off the bass amplification.
13
button once or several times to activate one of the preset
button once or several times to activate preset party LED light
button once to activate the DJ booth
button once to activate the DJ booth
12
for the colour selec-
14
for the sound
14
.
22
Publicidad
