Operating Features - Urmet 1092/222 Manual De Usuario

INSTALLATION
1. Make sure that no units are powered before starting the installation procedure.
2. Position the bracket in order to point it to the direction useful to capture images ; it is possible to adjust
the camera on HORIZONTAL, VERTICAL and TRANSVERSAL axes .
ADJUSTMENTS
Loosen the locking ring on the bracket and the screw showed in the below picture:
•
position the bracket on horizontal, vertical and transversal axes
•
point the camera in the desired direction
Once made, firmly block the locking ring.
Important note:
In order to avoid serious damages to the connection cable, avoid rotating repeatedly and excessively
the camera fixed to the bracket.
Looking ring
3. Connect the video output to the utility.
4. Power the camera.

OPERATING FEATURES

IR LED operation - DAY & NIGHT function description
The device is provided with a CDS sensor that switches the IR LEDs on when the light is approximately
5÷10 LUX. With the LEDs is synchronized switching to black and white and switching IR CUT FILTER.
DS1092-152
screws
Power wire
Video output wire
Power unit
Video input
5