BenQ ScreenBar Pro Guia Del Usuario página 4

Turning On/Off the Lamp and Entering Auto-dimming Mode
• Do not block the light sensor on the lamp. Otherwise the
Auto-dimming Mode will not function properly.
• If the Auto-dimming Mode is turned on, the lamp will
monitor the ambient lighting condition and dynamically
adjust the brightness.
• The Auto-dimming Mode will exit automatically and the
Auto-dimming Mode indicator will go off when you
manually adjust brightness or color temperature.
Manually Adjusting Brightness and Color Temperature
If the power supply is suddenly interrupted, the lamp will automatically return to its
settings before the power outage when the power is restored.
• If the lamp was on before the power outage, it will automatically turn on when power
is restored, and restore the brightness and color temperature settings before the
power outage.
• If the lamp was off before the power outage, it will remain off when power is restored.
Turning On/Off the Lamp
To turn on the lamp, tap the Power
the lamp, tap the Power
Entering Auto-dimming Mode
To enter Auto-dimming Mode, tap the Auto-dimming
Mode key when the lamp is on. The Auto-dimming
Mode indicator will light up. The Auto-dimming
Mode automatically adjusts the lamp's brightness
according to the ambient lighting condition and sets
the color temperature setting to 4000K.
Adjusting Brightness
1. Tap the Brightness Adjustment
lamp is on. The Brightness Adjustment
will light up.
2. Tap the key to decrease brightness, or tap the
key to increase it. You can select from 16 brightness
levels.
• If the power supply capacity is up to 5V 1.5A, only 14
brightness levels are available for adjustment.
• If the power supply capacity is up to 5V 0.9A, only 8
brightness levels are available for adjustment.
• If the power supply capacity is less than 5V 0.9A, the lamp
will not operate properly. Use the provided AC power
adapter or connect it to another power supply that meets
5V 2A to optimize the performance the lamp.
Adjusting Color Temperature
1. Tap the Color Temperature Adjustment
the lamp is on. The Color Temperature Adjustment
indicator will light up.
2. Tap the key to select a higher color temperature
setting, or tap the
can select from 8 color temperature settings: 6500K
(daylight), 5700K (cool white), 5000K, 4500K (neutral
white), 4000K, 3500K (warm white), 3000K and 2700K
(soft white).
key. To turn off
key again.
key when the
key to select a lower one. You
Light sensor
indicator
key when
English 3