Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
5
Securing the glass shade
□
Place the glass shade (B) over the fixture body (C).
□
Repeat the above steps for the other side of the shade (B).
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals, solvents or hash abrasives.
WARNING: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem
The lantern will not light.
The fuse blows or circuit
breaker trips when the light is
turned on.
Possible Cause
The power is off.
The circuit breaker is off.
Crossed wires or power
wire is grounding out.
7
Solution
Ensure the power supply is On.
Ensure the circuit breaker is in the On position.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at
1-877-592-5233.
Please contact 1-877-592-5233 for further assistance.
HOMEDEPOT.COM/HUBSPACE
Publicidad
