Jimmy PW11 Pro Manual De Instrucciones página 14

Problem
Spray mouth does not
spray water
Water spray out from
air path
Note: If the above troubleshooting guide fails to provide a solution or the screen displays error code F0 to F9,
please contact after service or local distributor for support.
Product Specification
Technical specification
Product name
Model
Rated Power
Battery Capacity
Charging Time
Rated Input
Rated Voltage
12
Possible cause
Clean water tank empty
Water spray button not pressed
Clean water tank not assembled
properly
HEPA and dust cup are put to use
without fully dry
Filter is not assembled in the dirty
water tank
Soft plastic folds under the filter
Cordless Vacuum&Washer
PW11 Pro
460W
4600mAh 21.6V
5h±0.5h
220-240V~ 50-60Hz
21.6V
Solution
Fill clean water tank
Press water spray button
Reassemble clean water tank
Dry the HEPA and dust cup after
washing before use
Assemble filter in dirty water tank
Reassemble the filter, the soft glue
must not be folded