nedis KAEP251EWT2 Guia De Inicio Rapido página 7

Before first use
1. Remove all packaging material, protective stickers
and covers from the product.
2. Place the product on a stable, flat and heat
resistant surface.
3. Plug the power cable A
4. Set both temperature control dials A
highest temperature.
The power indicator LEDs A
Allow the product to burn off residual manufacturing
oils for approximately 2 - 10 minutes.
When the product heats up for the first time, it
4
may emit slight smoke or odour. This is normal and
does not affect the safety of the product.
The product is ready for use when the light smoke has
cleared and the odour has faded.
5. When the cooking is finished, set both temperature
control dials A
-
Be careful when handling the product. The
product is subject to residual heat after use.
Using the product
-
Only use cookware that is suitable for electric
hot plates.
1. Place the product on a stable, flat and heat
resistant surface.
2. Plug the power cable A
3. Place the cookware on the one of the burners A
4. Set the temperature control dial A
desired temperature.
-
Do not use pots or pans that are smaller or bigger
than the burners or has an uneven bottom.
The power indicator LED A
Both burners A
4
5. When the cooking is finished, set both temperature
control dials A
4
2
to "0" to switch off the product.
3
4
2
can be used simultaneously.
1
to "0" to switch off the product.
3
7
into a power outlet.
3
light up.
into a power outlet.
3 to the
light up.
to the
1 .