About Rechargeable Battery; Basic Functions; Enter Into System And Power On-Off - Lenco TFT-1021 Manual De Uso

! If the remote controller does not operate properly, you may need to replace the battery. When the
remote controller is not being used for extended periods of time, remove the batteries to avoid possible
damage from battery leakage.
Caution: The remote control uses a CR2025 button battery. Does not recharge, disassemble, or heat the
battery. Misuse of the battery may result in leakage that will damage the remote control.

2.8. About Rechargeable Battery

Your portable TV device comes with a built-in rechargeable Lithium-Ion battery. Charge the battery fully
before initial use. Charging time is normally about 4 hours. A fully charged battery delivers about 2 hours of
use.
When the battery is weak, an indication symbol will appear on the LCD screen and the unit will power off
automatically after a few minutes.

BASIC FUNCTIONS

3.

3.1. Enter into system and power on-off

1. Enter into DVB system
It will enter DVB mode as soon as system power on. Figure 3.1 shows the system interface while none
TV/RADIO programs in the database:
It will continue to play the latest program before previous power off if the database having a TV or RADIO
program.
2. Power On：Push ON/OFF button from OFF to ON.
3. Power Off：Push ON/OFF button from ON to OFF.
Figure 3.1
6
OPEN
PUSH