Lenco TFT-1021 Manual De Uso página 14

2. It will pop up and dialogue box prompting that
enter into, and it will not enter into ADD-Edit Channel page.
3. Enter Add Channel menu, as shown in Figure 3.9
Under Add Channel menu, there are 6 parameters for adding one channel as follows:
(1).Area Name: For Area Name, press ► of the remote controller to enter the Area Name list on the
right, then press ▲▼ to choose area name, press ENTER to confirm;
(2).Carrier: Press ◄► to choose;
(3).Channel Name: Press ◄► to enter Rename Channel page;
(4).Audio PID, Video PID, PCR PID, Press 0-9 number key to revise values;
(5).Press ENTER to confirm the adding, the system will hint with Update succeeds and return to Edit
Channel menu;
(6).Press Menu/Exit to return to Edit Channel page.
4. Delete all
If you do not like one or some channels, you can delete it/them in Channel Organizer menu, but if you do
not like all TV or Radio, you can enter Delete All menu to choose to delete all TV and Radio channels.
Under Channel Manager menu, press▲▼ to choose Delete All option, press ENTER, then enter Delete
All menu as shown in Figure 3.10
No Carriers when there are no programs in database to
Figure 3.9
10