Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Time
When the "Time Dry" and "Refresh" programme is selected, the "Time"
button can be used to adjust the drying time in 10 min. steps.
Anti-Crease
At the end of the drying cycle, a 30 minutes anti-crease function is active
as default setting.
The time for the function can be adjusted to 30-60-90-120-150minutes.
This function prevents the laundry from creases. The laundry can be
removed during the anti-crease phase. Except "Time Dry", "Wool" and
"Refresh", all the other programmes have this function.
FIBER MASTER
You can adjust the dryness level of the laundry by pressing the "FIBER
MASTER" button.
1.
The intensity function can be activated only before the programme starts.
2.
Press the "FIBER MASTER" button repeatedly to increase the drying grade.
3.
Except the "Time Dry", "Hygiene", "Wool" and "Refresh" programme, all
the other programmes can be adjusted with the "FIBER MASTER" function.
Lamp
The drum light will be on for 1 minutes when the button is pressed or
1 minute when the door is open. "Bed Linen", "Sports", "Baby Care",
"Mix", "Synthetic" and "Hygiene" programs have UV function. The UV
light has properties that eliminate bacteria and viruses. Activating the
lamp can destroy almost all bacteria and viruses that persist after drying
and sterilizing your clothes. Except the "Hygiene" program, all the other
programs can be adjusted by pressing "Lamp" button for 3 seconds to
cancel UV function.
Signal
Set the buzzer on or off. In default condition, the buzzer is on. When the
buzzer is on:
1.
The dryer will affirm pressed function button by a sound.
2.
If the programme knob is rotated during the dryer is running, the buzzer
will remind the user that this is an invalid operation.
3.
When the drying programme is done, the buzzer will beep.
My Cycle
Used to define and save your favourite programme, which is used
frequently.
1.
Select the desired programme and other drying functions.
2.
Press and hold the "Anti-Crease" and "FIBER MASTER" for 3 seconds
until the beep sounds and the desired programme has been saved.
3.
Turn the programme selector to the "My Cycle" position, then you can
start your favourite programme. If you want to change the "My Cycle"
settings, repeat the steps (1) and (2).
12
EN
Publicidad
