Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Towel warmer has a 3-prong grounding to reduce
the risk of electric shock, plug the power cord into a
standard 120V electrical outlet that is easily accessible.
CAUTION: To provide continued protection against the
risk of electric shock, connect to properly grounded
outlets only.
PRODUCT SPECIFICATIONS
Rated Voltage
Frequency
Wattage Max
Weight
Dimensions
LOCATION OF PARTS AND CONTROLS
1
Power Button (Hold ON / Press OFF)
2
Timer Button
3
Lid
4
60-Minute LED Indicator
5
45-Minute Timer LED Indicator
6
30-Minute Timer LED Indicator
7
15-Minute Timer LED Indicator
8
Hot Surface Caution LED Indicator
06
120V AC
60Hz
210W
Approx. 5.5 lbs.
13" H x 12" W x 10.4" D
8
7
6
5
4
3
1
2
USING THE TOWEL WARMER
The Towel Warmer will warm one bath towel measuring
approximately 40" x 70". For best results, use 100%
cotton or cotton blend towels.
1.Place the Towel Warmer on a dry, level, hard surface.
2.Insert the power cord into an electrical outlet.
3.Place your dry towel(s) inside. Replace the lid.
4.Press and hold the POWER BUTTON until the TIMER
LED INDICATOR turns on. The TIMER LED INDICATOR
turns blue, indicating the Towel Warmer is preheating
(default timer setting is 15 minutes).
5.When the Tower Warmer has reached the optimal
heating temperature, the TIMER LED INDICATOR turns
red. The Towel Warmer will continue to maintain the
optimal heating temperature for the remainder of the
timer setting (timer starts to countdown when TIMER
LED INDICATOR turns red).
6.To ensure the towel is fully heated, you may want to
leave the towel in the Towel Warmer for a few minutes
after the TIMER turns off.
7.The Towel Warmer will automatically turn off after the
selected timer setting has expired. Press the POWER
BUTTON to turn the Towel Warmer off if you would like
to power off the unit sooner.
8."HOT SURFACE" LED INDICATOR will stay on until
the towel warmer cools down when it's safe to touch the
metal interior.
07
Publicidad
