Publicidad
Idiomas disponibles
Idiomas disponibles
Manuel
EN
Using the heater without smartphone
Simply Heating ON/OFF mode with 24hours timer
1. Check the heater to be sure it is not damaged before using.
2. Insert the plug in the socket;
3. Turn the main switch on, you will hear "beep", the full screen will be light on for 1.5
seconds , then display "--", WIFI light flashing and the heater is in standby mode;
4. Press "ON/OFF" switch,the display screen will show the room temperature.
5. Press the "+ or -" key to adjust the temperature setting, it will flash 5 seconds on the
display to confirm the setting temperature , then back to room temperature display.
With each key press , the temperature will be increased (+) or decreased (-) by one
degree.
6. Heater will start working when the setting temperature is 1 degree higher than
room temperature, or stop working when the setting temperature is 1 degree lower
than room temperature.
7. The device will retain the temperature setting by switching itself on and off
automatically.
Timer:
8. Press "T"to set the 0-24 hours timer, with each key press , the timer will go a hour
forwards ,cycle as:
1h
2h
3h
...
0h
Note: The countdown timer is set after 5 seconds unchanged blinking, then display
room temperature.
23h
24h
Fixed Weekly mode Program (operated by the key on the control box)
1. When it's working, press the "P" key to enter the weekly timing function,
P1-P2-P3-P4-P5-P6, and it will be cycle as follows:
p1
p2
p3
p4
P1- works from 8:00am to 5:00pm every day,
P2 - works from 6:00pm to 7:00am every day,
P3 - works from 8:00am to 5:00pm every day except Saturday and Sunday;
P3 - works from 6:00pm to 7:00am every day except Saturday and Sunday;
P5 /P6 - backup for update in future.
2. When the first time enter the weekly timing mode after power off, check the week
and time first: it will display D1(means Monday), press "+" or "-" to set D1, D2, D3, D4,
D5, D6, D7, which means Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday, press "+" or "-" to select the current day of the week and then press the
"P" key to confirm, then the first two digits of the display flashes, means to set the
time by hour ,press "+" or "-" to adjust the hour time, then press the P key to confirm
the current hour time, then the last two digital of the display flashes, means to set
the time by minute,press "+" or "-" to adjust the minute time,press P to confirm
the minute time.Then back to weekly mode program, the device will be on and off
according to the fixed program, the weekly mode icon will be light on.
3. Then you can set the target temperature by press "+" or "-".
Note: Weekly mode program is only to set the time, temperature need to be set
separately.
FlinQ Smart Indoor Infrared Heater
p5
p6
Publicidad
