Alto Professional STAGEDRIVE+ Guia De Inicio Rapido página 9

The following editable parameters are available, in two different pages:
a. Noise Gate ON/OFF
b. Reaction times- Sets the Noise Gate attack and
release times.
- ATTACK (AT): The time needed by the filter to bring back the signal to its normal level when
it goes above the threshold.
- RELEASE (RL): The time needed by the filter to cut the signal once it goes below the
threshold.
Threshold- If the signal goes below the set threshold level, the Noise Gate reduces the signal. The editing
values are within the following ranges: +8dBu -60dBu, with 2dBu steps.
Range- Sets the amount of the signal level reduction.
The editing values are within the following ranges: 0dBu -80dBu, with variable steps.
Input/Output EQ: Five band parametric EQ filters. Allows you to alter the overall tone of the signal.
The following editable parameters are available for each filter:
• Type of filter- Select the filter to be Peaking, Low or High Shelving with a slope of 6 or 12 dB per octave
and Notch filter.
8