stayer FL12 Manual De Instrucciones página 8

FL12
Nominal Voltage
Weight
Head lighting
Handle lighting
Setting
Approx. autonomy
Use
These data are valid for a nominal tension of [U] 230/240 V ~ 50/60
Hz – 110/120 V ~ 60 Hz. Values may vary for other voltages and in
specific embodiments for certain countries. Pay attention to the
Article No. on the specifications plate as commercial
denominations may vary in some countries.
Keep this manual
Read and keep this manual for future reference,
mounting, operation, inspection, servicing and
cleaning procedures. Keep this manual at a dry
and safe place for future reference. .
Specific safety alerts
1.- Read and follow all alerts as foreseen regarding
the battery and charger.
2.- no direct the light of the flashlight directly towards
the eyes of animals or persons.
3.- This is not a toy, keep it away from children.
Read all safety instructions in the section at the beginning of
this manual
Illustrated description of the functions
Deploy and keep the flap with the image of the flashlight
open while reading the handling instructions.
1.- Spotlight closing ring
2.- Movable head
3.- Grip
4.- On/Off switch
5.- Battery
6.- Battery adjustment flange
7.- Additional light
8.- Reflector
9.- Battery charger
10.- Base
Flashlight operation
1.- Insert completely charged battery 5 into the base
10 of the flashlight making sure that it fits in its
place in a safe manner.
2.- Adjust the position of the movable head 2 of the
flashlight (upwards or downwards) in accordance
with the desired position.
3.- Push the On-Switch 4 once to activate the LED
12V
0.36 kg
Single high-intensity LED
14 white LED battery
90º rotary head
22 hours
Wide sites
ENGLISH
5
light at the upper portion. Push again to activate the
additional LED light 7. Push a third time to activate
both mode 4 and 7.
4.- When having finished using the flashlight, push the
On-button 4 again to switch-off all LED lights.
5.- To remove the battery 5, press flanges 6 and pull
downwards to remove the battery 5.
6.- Thereafter clean and keep the flashlight at a dry
place outside children's reach.
Cleaning and maintenance
1.- BEFORE EACH USE, inspect the overall condition
of the tool. Check if there are loose pieces, the
alignment of all movable parts, cracked or broken
pieces, damaged cables and any other condition
that might affect its safe operation.
2.- AFTER USING, clean all outer surfaces of the tool
with a clean cloth.
3.- WHEN STORING, always keep it at a clean, dry,
safe place outside children's reach.
Maintenance and service
Maintenance and cleaning
If the flashlight should fail despite the thorough
manufacturing and control processes, repair must be
entrusted to an authorized servicing workshop for Stayer
electric tools.
Technical service and customer
assistance
The exploded drawings and information on spare parts can
be found at the following address:
www.grupostayer.com
Disposal
Flashlights, accessories and packaging must be subjected
to a recovery process that respects the environment.
For EU countries only:
In accordance with European Directive
2002/96/EC on unserviceable electric and
electronic apparatus, after its transposition into
national law, electric tools must be collected
separately to subject them to ecologic
recycling.
Accumulators/batteries: Ni-Cd, Ni MH, Li-Ion: Lithium Ion
For EU countries only:
Li-Ion
Exhausted accumulators/batteries may be handed out to
Stayer Ibérica:
5
I n a c c o r d a n c e w i t h D i r e c t i v e
2006/66/EC faulty or exhausted
accumulators/batteries must be
recycled.