Descargar Imprimir esta página

Elnur Gabarron VANTIC DC Instrucciones De Instalacion Y Uso página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
3.- OPERATION INSTRUCTIONS
Your fan may be operated by using either the manual controls located on the top of the fan or by using
your remote control.
3.1. Top fan control panel
3.2. Remote control
Your fan is supplied with a remote, which allows full control of all the units functions.
The buttons on the remote have the same effect as the buttons on the main control panel.
Replacing the batteries
The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the remote become
unresponsive, replace the battery following the instructions below:
1. Turn over the remote and press tab A to the right.
2. Slide out the battery tray B
3. Replace the battery with the same type, ensuring the positive side is facing upwards.
ON/OFF. Wind speed Button
This is the on/off and wind speed button. Press the button to turn on the fan and
cycle the wind speed 1- 6.
Hold on 3 seconds to turn off the fan.
TIMER Button
Press this button to start the timer function. Each press will increase the timer by 1
hours. The timer function can be set between 1 and 7 hours.
SWING Button
Press this button to start the swing function. The swing button light will turn on.
Press the button again to turn of the swing function.
9

Publicidad

loading

Productos relacionados para Elnur Gabarron VANTIC DC