Würth BS 12-A MULTI Instrucciones De Servicio Originales página 16

Do not open the battery. There is a risk of short-circuit-
r
ing.
The battery can be damaged by pointed objects
r
such as nails or screwdrivers or by force ap-
plied externally. An internal short circuit may occur,
causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the
r
manufacturer. This is the only way in which you can
protect the battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is a
risk of explosion and short-circuiting.
Product Description and
Specifications
Read all the safety and general instruc-
tions. Failure to observe the safety and general
instructions may result in electric shock, fire and/
or serious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
Cordless Drill/
Driver
Article number
Rated voltage V=
A)
No-load speed
-1
– 1st gear min
– 2nd gear
-1
min
Maximum torque, soft Nm
screwdriving applica-
tion according to ISO
5393
Maximum torque, Nm
hard screwdriving ap-
plication according to
ISO 5393
Max. drilling diameter (first/second gear)
– Wood mm
16
The power tool can be used with an angle screw adapter
(BS12-WB), off-set angle adapter (BS12-EV 1/4''), bit holder
adapter (BS12-BV 1/4'') or drill chuck adapter (BS12-SB 10).
The user is liable for damage incurred as result of using the
tool in any way other than that intended.
The numbering of the product features refers to the diagram of
the power tool on the graphics page.
(1) Tool holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button (2x)
(5) Battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) Worklight
(10) Bit holder adapter BS12-BV 1/4''
(11) Drill chuck adapter BS12-SB 10
(12) Off-set angle adapter BS12-EV 1/4''
(13) Angle screw adapter BS12-WB
(14) Locking ring
(15) Handle (insulated gripping surface)
(16) Universal bit holder
a) Accessories shown or described are not included with
the product as standard. You can find the complete
selection of accessories in our accessories range.
Technical data
BS 12-A MULTI BS12-BV
1/4''
5700 131 000 5700 121 002 5700 121 001 5700 121 004 5700 121 003
12
0–400
0–1300
B)
15
B)
30
19
Product features
a)
a)
a)
a)
BS12-SB 10 BS12- EV
1/4''
– –
– –
– –
– –
– –
– –
a)
BS12-WB
– –
– –
– –
– –
– –
– –