Publicidad
ENGLISH
free of obstructions.
Installing the window sealing plate
You can install the window sealing plate either vertically (Fig. 8) or horizontally (Fig. 9).
Adjust the size of the opening so that the sealing plate remains fixed in it.
The following checks must be applied to installations using flammable refrigerants:
The charge size is in accordance with the size of the room within which the refrigerant
containing parts are installed.
Ventilation machinery and outlets are properly operated and unobstructed.
If an indirect cooling circuit is used, the secondary circuit must be checked for the
presence of refrigerant.
Equipment marking remains visible and legible. Markings and symbols that are
illegible should be corrected.
The components or refrigerant piping are installed in a location where they are not
susceptible to exposure to any substance that may corrode the refrigerant containing
components, unless the components are constructed of materials that are inherently
corrosion resistant or are adequately protected against corrosion.
4. OPERATION
The following functions can be activated from the control panel or from the remote
control.
On/Off
When the device is turned on, it will beep and enter standby mode. Touch the power
icon to turn the device on and off.
Mode
Press the mode icon to switch between cooling, fan, and dehumidification modes.
Note: when the appliance is running in cooling and dehumidification mode, the
condensate drainage will be done through the upper condensate outlet. When the
device is running in heating mode, the condensate drainage will be done through the
lower condensate outlet.
Note: when changing from heating mode and vice versa, the appliance will take
some time to change from one mode to the other. It may take a few minutes for the
41
EVVO VENTILADOR PORTÁTIL CLIMA P9 FRÍO Y CALOR
Publicidad
