Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
TABLE
,_
WARNING:
Always stop unit and disconnect
from the power source before
performing
all of the recommended
remedies below except remedies that re-
quire unit to be operating.
SYMPTOM
Unit fails to
operate.
CAUSE
1. Switch in the OFF position.
2. Extension
cord discon-
nected.
3. Circuit breaker tripped, or
fuse blown.
4. Mechanical
failure
REMEDY
1. Slide switch to ON position.
2. Reconnect
extension cord.
3. Reset circuit breaker or
fuse.
4. Contact Sears Service
(see back cover).
1. Contact Sears Service
(see back cover).
Unit
1. Mechanical
failure
vibrates
abnormally.
Impeller will
1. Debris in air intake area.
1. Clean unit. Remove any
not turn
debris.
freely.
2. Mechanical
failure.
2. Contact Sears Service
(see back cover).
Publicidad
