Smoothskin PURE MINI LITE Manual De Instrucciones página 30

13. TROUBLESHOOTING
PROBLEM
The power bar lights on the handset do not light up
when placed against your skin.
The power bar light on the handset lights up white
when placed on the skin, but the handset fails to
flash when the activation button is pressed.
The central power bar light on the handset
illuminates red when placed against your skin.
The power bar lights on the handset are illuminated
red continuously, and the device will not function.
The SmoothSkin Pure Mini Lite handset, treatment
window, power supply or cable are damaged,
broken, cracked or appear defective.
30
SOLUTION
Make sure the power supply is plugged in. Ensure
the skin tone sensor is fully pressed against the
skin.
There could be a fault with the device. Unplug the
device and restart. If the problem persists, visit
the website for support details.
Your skin could be too dark for treatment. Check
against the skin tone chart in the front of this user
guide. This could also be due to poor skin contact,
ensure the device is pressed firmly against your
skin.
This indicates that there is a fault with the device.
Stop using the device and visit the website for
support details.
DO NOT use. If you are in any doubt about the
safety of SmoothSkin Pure Mini Lite or suspect it
is damaged in any way, it must not be used, and
you should visit the SmoothSkin website for more
information.