GE 23 Manual Del Propietario E Instalación página 5

About the temperaturecontrols. GEAppliances.com
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Ak FlowSystem
The Pe_tbm_ance
:Mr Flow System is designed
to maximize temperature control in the retiigerator and
fl'eezer con_partments. This Ulfique spedal teature consists of the _di" Tower along the back wall of the
refligerator and the _di" Tulmel on the bottom portion of the fl'eezer rear wall. Pladng food in fl'ont of the
louvei's on these con/poi_ents will not affect peltblmance. _Mthough the _di" Tower and the _di" Tulmel can
be relnoved, doing so will affect telnperature perfin_nai_ce. (For relnOX:fl instructions, on-line, 24 hours a
da> contact us at GEAppliances.com or call 800.GE.CARES. In Canada, contact us at geappliances.ca or
call 1.800.361.3400.)