GE 23 Manual Del Propietario E Instalación página 8

About the shelves and bins.
Not all features are on all models.
Refrigerator bin
Refrigerator Door Bins
The reii_igerator door bins are a(!iustable.
Toremove: I,ifl the ti'ont of the bin straight
up, then lift up and out.
To replace er relecate: Engage the back side
of the bin in the molded supports of the
door Then push down on the fl'ont of the
bin. Bin will lock in place.
The snuggerhelps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side (ff the
snugger near the rear and move it back
and fi)rth to fit wmr needs.
Deep Door Shelves
Detachable shell extende_ deepen and
enclose fixed door shelves, providing
ii/oi'e storage
I'OOII/ and
greater storage
flexibility.
To remove: i,iti the shelf extender straight
up then pull out.
To replace:Engage the shelf extender in the
molded supports on the door and push in.
It will lock in place.
Press tab and pull shelf
forward to remove
Slide-Out Spillpmof Shelf
The slide-out spillprooI shell allows you
to reach items stored behind othe_. The
special edges are designed m help prevent
spills ti'om dripping to lower shelves.
Toremove:
Slide the shell out tmtil it reaches the stop,
then press down on the tab and slide the
shelf straight out.
Toreplace or relocate:
I,ine the shell up with the supports and
slide it into place. The shelf can be
repositioned when the door is at 90 ° or
more. To reposition the shell, slide the shelf
past the stops and angle dowm_m'd. Slide
shelf down to the desired position, line up
with the supports and slide into place.
Make sure you push the shelves all the way back
in before you close the doo_